Winter car windshield frosting, icing maintenance knowledge

                                                 It is especially important to maintain the winter vehicles and prevent them from being reared. In winter, the front windshield is easy to freeze when it is raining, especially after the vehicle is parked for one night. When the temperature is below zero, the front windshield has water and it is easy to freeze.

Method 1: Warm air deicing

The best way is to start the car. When the engine water temperature rises, blow the glass with warm air until the ice melts. But this method also has certain drawbacks, which is time-consuming, laborious, and costly. If there is no rain or snow after the car is closed, wipe off the water on the windshield to avoid freezing again on the windshield. If it is snowing, wipe off the windshield after the car is closed, then cover the windshield with a layer of newspaper, so that you can tear off the newspaper when you leave the car, no need to worry about the windshield. It’s frozen.

Method 2: Physical Deicing

The owner can prepare a hard plastic scraper. Of course, a special glass frost shovel can be used. The glass frost shovel is more convenient and quick, and it is not frozen. . When there is snow and ice on the glass, use a plastic blade or a glass shovel to remove it. However, Geely Global Eagle’s high-grade Runfu first-class service station reminds the owner to prevent the glass from being scratched in addition to ice and snow. Plastic scrapers or glass frost shovel can not be scraped back and forth, and should be pushed in the same direction.

Method 3: Chemical Deicing

There is a spray deicing agent on the market, which is a high-speed anti-icing spray concentrate for icing windows and wipers. The body surface prevents icing and soiling. When the temperature is below 30 °C, the ice and snow can be easily removed. At the same time, it can prevent the windshield and the water from freezing, without damaging the surface of the vehicle. After cleaning, the glass is smooth and free of streaks.

Method 4: Keep the temperature inside the car at the same time

After using the car in one day, do not immediately lock the car and leave, but open the door and ventilate, wait for the temperature inside the car. When it is about the same as the temperature outside the car (about one minute), then turn on the power and brush the snow on the windshield with a wiper; at this time, close the door and lock the car. The next morning, as long as the snow on the windshield is removed, there is no ice under the snow, and you can drive on the road immediately.

Method 5: Covering Anti-Ice

is the windshield companion currently on the market. It is made of national environmental protection materials, with a low temperature of 40 degrees and a double-sided anti-icing and anti-icing. Just lightly cover it, gently peel it off in the morning, fold it in the bag, and the hot car can be set off. Save time and fuel. For the car owners who are unwilling to reach out and toss themselves and love to be clean on a cold day, it is the best choice.

Leave a Reply