As the speed of cars entering the family has increased, how to maintain the car has become one of the most concerned topics. In addition to regularly going to the repair shop for regular maintenance on time, the maintenance of some small places is also worth paying attention to, because the maintenance and care of these places are also related to the comfort and safety of your driving.
Dashboard cleaning needs to be detailed
One of the most important parts inside the car is the instrument panel. Its cleanliness directly affects the health of the driver and the overall environment of the car. The visual experience of the effect. Due to the complicated structure, the instrument panel has many corners and corners, which makes it difficult to clean. A little attention to the dashboard will reveal that there are very few parts that can be cleaned with only rags and sponges. Some trenches can also be cleaned with “special tools”.
Use a variety of different thicknesses of wood chips or ruler pieces to repair the head into a diagonal triangle, rectangle or pointed shape, and then wrap it with a clean rag. It is ideal to clean the ditch. It can improve the cleaning effect without damaging the parts to be cleaned.
Washing carpets by trick
The most dirty place in the car is the carpet. If you vacuum the brush with a brush head, you can make the dirty carpet look less dirty. . For more dirty carpets, only special detergents can be used. Generally, before using the detergent, first remove the dust, then spray the appropriate amount of detergent, brush it with a brush, and finally wipe off the excess detergent with a clean rag. This will make the washed carpet clean and follow. It was as soft as before.
It should be noted that the carpet should not be completely immersed in water for cleaning. On the one hand, it will damage the adhesion of several layers of different materials inside the carpet. On the other hand, the carpet will not dry out for a long time. The effect is used to cause moisture in the car.
There are doorways for brake maintenance
The focus of the brake system is on the amount of brake fluid to confirm whether it reaches the baseline of the storage tank. If the brake fluid is found to be significantly reduced compared to the previous inspection, the probability of failure is high. If the amount of liquid is insufficient, the air will enter and the brakes will become insensitive. In addition, check the clutch, try to pedal, check the intermittent point, contact failure or accurate deviation requires repair. For the brake fluid, the following 6 points need special attention: 1. The storage tank of the brake fluid is made of translucent resin. If the can is dirty, just wipe it with a cloth to perform a simple visual inspection. 2. The amount of brake fluid and There is a close relationship between the wear of the brake pads, and there is no problem when it is slowly reduced. If the speed is reduced, temporarily fill it up and then observe. 3. Check the remaining amount of brake fluid through the display window of the card box, or pay attention to the damage of the brake pipe at the same time; 4. Spray the brake cleaner on the card box and the disc roller to remove the dust grease and make the brake sensitivity. 5. In the clutch aspect, first check the amount of storage tank in the engine compartment. When the clutch is insufficient, the clutch cannot be separated. 6. The clutch uses the same liquid as the brake fluid, and one can be used as a spare.