Preventing car deposits, these three tricks are very practical!


Car owners are often entangled in the problem of car deposits. In addition to driving habits, car deposits are also highly relevant to car maintenance. Here, Xiao Bian provides some car owners with some precautionary measures for car deposits, hoping to alleviate the car owners’ troubles.

Using Clean Gasoline
The impurities in gasoline are the main components of carbon deposits, so the trend of carbon deposits with low cleanliness is weaker. However, it should be noted that the high number does not equal the high quality. The label only represents the octane number of the oil and does not represent the quality and cleanliness. Choose a genuine gasoline cleaner to help remove carbon deposits from the engine, effectively prevent the formation of carbon deposits on the metal surface, and gradually activate the original carbon particles and slowly remove them to protect the engine from damage. However, the addition of gasoline cleaners must be cautious. If you add a fake product, you will get the opposite effect.

Don’t drive for a long time

The idle time is long, and the time required for the engine to reach normal temperature becomes longer. When the gasoline is sprayed on the back of the valve, the evaporation speed is slow, and the carbon deposit is also caused. Health. At the same time, it is often idling, and the air flow into the engine is also small, so that the scouring effect on the carbon deposit becomes weak, which promotes the deposition of carbon deposits.

Pay attention to the timing of flameout

For cars equipped with turbochargers, do not turn off the fire immediately after high-speed driving or climbing, and then turn off the flame after 10 minutes of idle running. The car of the press has a carbon deposit that is several times faster than a naturally aspirated car.

It is recommended that the car owners do the cleaning of the intake system every 20,000 to 40,000 km under the condition that the routine maintenance is satisfied, that is, the special equipment-specific method on the premise that the engine is not disassembled. The carbon sequestration operation is performed on a portion where the carbon deposit is easily formed in the intake port, the valve, the oil passage, and the like of the vehicle.

Leave a Reply